E-8000 stick drill special needle glue
Specification: 10ml/15ml/50ml/110ml
[Scope of application] Fully transparent imported rubber, two sizes and specifications, blister packaging, easy to ship and transport, not easy to crush, longer shelf life, easy to use needle design, applied to all walks of life. Suitable for handicraft production Crystal rhinestones Beads bonding Watches Accessories Headwear Mobile phone case DIY and other repairs, unique pinhole design, even the complex and small parts can be accurately operated
[Nature] This glue is environmentally friendly, transparent, and does not hurt the material. It is especially suitable for a glue that is especially convenient.
[Advantages] Excellent quality of glue, high environmental protection, beautiful packaging, easy operation
Typical features and uses: 1. Professional drilling of rhinestones 2. Repair ceramic and wood figurines 3. Replace the pieces on the broken cup 4. Assembly craft design 5. Repair the courtyard and garden statue 6. Repair cracks and cracks in the wooden frame. Rebuild the edge of the damage. Fill the nail holes and drill holes 9. Adhesive ceramic parts to wood or metal-bonded concrete 10. Can be used in busy traffic areas as a protective layer for contact surfaces. 11. Good acid and alkali resistance, it can be used as anti-corrosion protective coating in acid-base environment (such as salt water or sulfuric acid). 12. Insulation performance: With excellent dielectric insulation and resistance, it is very suitable for electronic equipment. 13. Not flammable. 14. Others: High impact resistance and will not shrink, burst or solidify during the molding process. After curing, it can be sanded, ground, filled, lightly hammered, cut and drilled, and sweeps most of the paint. It can be shaped into any shape to replace small pieces that are damaged or missing. It can be used for vertical and vertical construction without sag. Easily compatible with color, with powdered colorants, most water-based colorants and food dyes.
[E8000 technical data]
Appearance: transparent semi-fluid
Solid content: 33%-45%
Hardness after curing: 78-98A
Surface dry time: 3-6 minutes or so
Full cure time: 24-48 hours
Colloid: fully transparent soft plastic semiconductor
Characteristics: no blush, no fragility, no yellowing, no hard, very small smell
Save: Save at 10 to 30 degrees
Concentration comparison:
B-6000 (3500CPS)
B-7000 (2800CPS)
E 8000 (3000 CPS)
How to use and precautions
1 Read the instructions before use. Use only in a well ventilated environment. The bonding surface should be clean, dry and free of dust. The surface should be roughened before use to ensure the bonding strength. It can be used between 10 °C and 32 °C. The temperature is better between 21 °C and 29 °C. The glue can withstand a temperature range of -40 ° C to 66 ° C, and a small area test before formal use.
2 Apply it directly to the surface to be bonded, press firmly, start to thicken after about two minutes, and solidify in 10 minutes. To achieve higher strength, let the bonded parts dry for 24-72 hours. When the temperature is low, the curing time will be prolonged. When the temperature is high, the curing time will be shortened. The curing can be accelerated by the hand-held hair dryer. It should be set in the low temperature range, not directly against the universal glue.
3 You can remove the dry glue with acetone or turpentine. The cured material can be cut or scraped off with a tool.
4 If you use this all-purpose adhesive to bond fabrics, do not dry the fabric.
5 This all-purpose adhesive is not recommended for bonding foamed polystyrene, polystyrene, polyethylene, polypropylene plastic.
Storage method: Store at 10 to 27 icing/thaw: let the product reach room temperature before opening the lid